Re: 2009 Cadillac CTS-V, 23 nov '08: 1.0

[DonaemouS]

from the first public available day of the new CTS-V, thesnail complaint about brakes inefficiencies. Around spa, it's quite impossible brake the car at bus stop chicane, cause the rear wheels tend towards stop.

Code:

FRONT:
wheels.pos {-0.770,0.110,1.557}
wheels.inertia 2.798
wheels.powered 0.0
wheels.friction 10
wheels.maxAngle 0.48
wheels.maxSuspension 0.130
wheels.radius 0.343
wheels.braked 6950.0
wheels.handbraked 0.0
wheels.model "cadillac_ctsv_09_wheel.mdl"
wheels.width 0.255
wheels.texture 6
wheels.grip 1.0
wheels.stickyness 0.13
wheels.loadSensitivity -0.07

REAR:
wheels.pos {-0.770,0.110,-1.384}
wheels.inertia 2.991
wheels.powered 0.5
wheels.friction 10
wheels.maxAngle 0.0
wheels.maxSuspension 0.130
wheels.radius 0.328
wheels.braked 3150.0
wheels.handbraked 1.0
wheels.model "cadillac_ctsv_09_wheel.mdl"
wheels.width 0.285
wheels.texture 6
wheels.grip 1.0
wheels.stickyness 0.13
wheels.loadSensitivity -0.07

these are the infos about brakes. The preview 1 has wheels.braked to 3350.0; I lowered to 3150.0 and the car seems (and i repeat seems) to be a bit more stable. But, reducing the rear brake power, do I reduce the entire brake efficiencies too?

So, reducing and reducing rear values, do I rise the front one? And how? I reduce by 100 and add 100 to front?

[DonaemouS]

new preview 2. If you downloaded the Legacy preview 1, you should redownload this new version to keep update. Introducing important tweaks and fixes. look at first post.

[DonaemouS]

new fixes will come. Thx to Val testing, I discovered the aerodynamic was messed up. The new value will be rised:

Code:

;the car's frontal air resitance.
;this equals cw*S, where cw is the coefficient of friction
;and S is the frontal area of the car in square meters.
;Drag coefficient    0.355
;Frontal Area    2.41 m2
frontAirResistance 0.855

This new setup will lower the acceleration at higher speeds and top too. The brake efficiency is like good now. slowDan sent me a pvt noting:

The front numberplate is in front of the car, and the brake discs are square with interiors off. Other than that I can see nothing really wrong with it.

thx mate, I will fix these errors too.

[leoantix]

whoa ... this car is a monster. i must say, not bad for a caddy

the model is gorgeous as usual don and the car is hella fun. one question, are the brakes this weak? i know she's a heavy girl, but i would think the brakes would be a bit stronger judging from cadillac's history of "tank" brakes. the car feels heavy and very well balanced as i assume it is. the other note is the stability, i think she is the most stable car out of your lot, wasn't expecting that when i first took her out. keep up the good work ... i cannot wait for that interior

[DonaemouS]

one question, are the brakes this weak? i know she's a heavy girl, but i would think the brakes would be a bit stronger judging from cadillac's history of "tank" brakes. the car feels heavy and very well balanced as i assume it is.

thx for your comments. The CTS-V has a strong braking system. A six pistons Brembo brakes. I will rise the braking power in preview 3.

the other note is the stability, i think she is the most stable car out of your lot, wasn't expecting that when i first took her out.

Do you feel this car is too much predictable, or is good as she is?

[alphonse]

Do you feel this car is too much predictable, or is good as she is?

I can handle it quite good, which is not "normal" with your cars.
Be it good or bad... i love that car.

alphonse

[leoantix]

Do you feel this car is too much predictable, or is good as she is?

imho, a bit too stable ... with all that weight and power it should be controlled and balanced yet not without hazard

[Tomte]

Don, you might need to harden the edge where the wheel arches meet the body.
Like in this photo:


Full Size

[Tomte]

Don, you might need to harden the edge where the wheel arches meet the body.

Ah, crap, I just realised that I made a photo of the old model.

[DonaemouS]

and looking at the rims, is also a wonnabe-v Cadillac CTS.

[DonaemouS]

[NoNameBrand]

Looking good!

[DonaemouS]

OT: Cadillac Europe announced the new (amazing imho) CTS Coupe. Probably, this car will replace the XLR series, soon or later.

At the same time, Cadillac Europe removed the XLR from italian site. This car wasn't a success in Italy. Perhaps the customers who want to buy a car like this, is a bit demanding. In Italy they was selling the 2006 model for over 89000 Euros.

[leoantix]

In Italy they was selling the 2006 model for over 89000 Euros.

silly europeans

btw: that rear is looking sheksee

[DonaemouS]

emmmh

what mean "sheksee"?

[leoantix]

what mean "sheksee"?

sheksee rear =

"want to touch the hiney" - AS

[DonaemouS]

mh...

i think i love the sheksee word...

[See Flat]

"want to touch the hiney" - AS

Oh my...this isnt ambrosia forums is it... That's kind of like Redline.... It's not perfect.. but I like it.

[DonaemouS]

what can do a caddy cts-v?

[See Flat]

that looks fabulous. Nice editing. Looks great at the stop when cars coil back from braking.

[DonaemouS]

indeed, I really like how the suspensions worked... emmmh look at first post...

[DonaemouS]

im really sorry, it was completely my fault... preview 3 is bugged on collision box.

I just uploaded the preview3a. This fix my errors. Pls redownload the car, if you already downloaded this car before this post...

[Tomte]

I had no time to properly test the car, but the engine sounds like a washing machine at full spin.

[See Flat]

that would be a defective washing machine at full spin.

[DonaemouS]

interior is done...

textures are coming up:

[Sponsored content]